in 2010 uk Health & Safety recommend that all 4 IN 1 EuroBungy style bungee trampolines have the winch Motor tilted in a angle the same as our mobile units so as too stop the problem of winch ropes getting tangled ,damaged or breaking. (some us adips inspectors are refusing to test 4 in1 bungee units now with out this modification.)
so we came up with this solution that can be retro fitted to any euro bungy 4 in1 unit (our classic style 4 in1 units come with this as standard)
it will take around 30 mins for you to convert your old bungee base plate to this system and its so easy to do if you can tighten a bolt you will be able to do this.
The Wedges are fitted to the base plate, with 2 bolts in each wedge
The Wedges are designed to tilt the Winch motor to an angle where the rope travels through the centre of the Winch Motor stop bar with no need for the normal carbineer.
You then clamp the Puck to the rope as the rope go's through the centre of the Winch Motor stop bar the puck will now act as the stop, hitting the Winch Motor stop bar squarely once set.
when we first designed this we found that the pucks where making the rope wear at the point where the puck connects to the rope and hits the motor stopper bar so we designed a new version "v3 puck" that stops this problem and we are the only bungee company to offer this.
this is the original kit don’t accept inferior imitations.
with Nylon pucks as a stops.
The Wedge Kit contains:
· 8 off Aluminum Wedges drilled and taped
· 32 off Plated Allen Socket Head Screws
· 16 off Washers
· 4 x "v3 pucks"
Choose a currency below to display product prices in the selected currency.